Galaxy won't connect to internet when Wi-Fi is on

By
 | If your Galaxy phone shows it's connected to Wi-Fi but can't access the internet, it usually means there's a problem with your router, network settings, or the connection itself; common fixes include restarting your phone and router, double-checking your password, and checking for any network issues with your internet service provider. 
Here are a few things to check:
  • Basic checks:
    • Airplane mode: Ensure airplane mode is off on your phone. 
    • Router status: Confirm your router is powered on and functioning correctly. 
    • Password accuracy: Double-check that you're entering the correct Wi-Fi password. 
  • Device restarts:
    • Restart your phone: Turn your Galaxy off and back on again. 
    • Restart your router: Unplug your router for a few seconds, then plug it back in. 
  • Network settings:
    • Forget network and reconnect: Go to your Wi-Fi settings, select your network, and choose "forget network" then reconnect and re-enter the password. 
    • Check for updates: Ensure your phone and router firmware are updated to the latest versions. 
    • Reset network settings: In your phone settings, you can try resetting your network settings to factory defaults (this will remove saved Wi-Fi networks, so make sure to re-enter details afterward). 
  • Further troubleshooting:
    • Check for network issues: Contact your internet service provider to see if there are any known outages or issues with your network. 
    • Check for signal strength: If you're far from the router, try moving closer to improve signal strength. 
    • Advanced settings: If you're comfortable with network settings, you can try adjusting your DNS settings on your phone. 
How to troubleshoot a Galaxy phone that won't connect to a Wi-Fi network
Jan 12, 2024 — Check out the guide below. * Check 1. Make sure the router is available. ... * Check 2. Restart the devices. ... * Check 3. Reset the network setti...

Peter has been active on the C# and other MS newsgroups, has had samples at gotdotnet.com (now codegallery.com) that have been downloaded over 56,000 times, and has written numerous articles for eggheadcafe.com, for which he is a co-founder, and MSDNAA sites. He has also been a technical reviewer on books from Prentice Hall, Manning and other publishers. Peter was a Microsoft MVP for 10 years. Peter was born and raised in New York City, and after a stint as a jazz musician playing contrabass with the Robert Hunt Trio, migrated to sunny Florida, where he was hired as a rookie Financial Consultant at Merrill Lynch in Orlando, specializing in Corporate Services. It was at Merrill that Peter realized computers and technology were his forte. He spent his last few years at Merrill developing real – time computerized trading and and stock charting program using advanced technical analysis indicators, some of which are his own inventions. In 1997, he moved on to architect and serve as lead developer on a number of innovative web-based and middleware solutions for the healthcare and financial services industry.

Comments

Post a Comment

Popular posts from this blog

FIX: Requested Registry Access is not allowed (Visual Studio 2008)

By
Symptom: in Visual Studio 2008, you attempt to add a new WebContentForm and associate it with a MasterPage. You receive an error dialog "Requested Reqistry Access is not allowed". Don't ask me what caused this; I'm guessing that the registry keys involved had their access denied due to removal of a previous version of Visual Studio, leaving the new guy (Visual Studio 2008) in the lurch. Here's the fix: Download "subinacl" here . This is a command-line tool that enables administrators to obtain security information about files, registry keys, and services, and transfer this information from user to user, from local or global group to group, and from domain to domain. After installing subinacl.exe (it will be in the C:\Program Files\Windows Resource Kits\Tools folder.), drop to a command prompt and run the following batch file, which you have saved in the same folder with the filename "FIX.bat": subinacl /subkeyreg HKEY_CLASSES_ROOT\VisualStudi...
Read more

IE7 - Vista: "Internet Explorer has stopped Working"

By
Image
This one was a bitch. All of a sudden for no reason at all, out of the blue, I get this dialog "internet Explorer has stopped working". I didn't install any new software, crap- I didn't do anything! So here I am using FIREFART to go on the internet and find out what to do! Damn! Good thing I've got the sucker on the same machine (I'm not "anti-Firefox", i just don't use it that much except to check my page renderings). The Fix The fix (at least for me): 1) Go into Control Panel, and choose "Internet Options". 2) Under the "Advanced" tab, press the "RESET" button at the lower right: Don't ask me why this happens, or why the fix works. That's a BUG, D00D - I don't care how you slice it!
Read more

KB929729 Windows Update Failure - An Easy FIX

By
Image
OK, it's Microsoft Windows Update "Fun Time" again! KB929729 Security Update for .NET 1.1 shows up in Windows Update and guess what? It never goes away. It's like it's going to be there wanting to get reinstalled like FOREVER. The 1.1 service pack was an optional update that many users did not install, so the latest security update is doomed to fail. The security update did not search for the right version prior to installation so either you got a installation failure message or it "updated sucessfully" only to reappear as a needed update a few minutes later. If you are unfortunate enough to have .Net Framework version 2 or 3 without updating your service pack for version 1 your headaches just got worse, because the official "FIX" for this involves uninstalling ALL versions of .NET Framework and is quite painful. Fortunately for many the shorter "Fix" I detail here should work. NOTE: This is for Windows VISTA ONLY. 1) Instead of using...
Read more

Visual Studio 2008 (ORCAS) "Project Creation Failed"

By
For a list of all the ways technology has failed to improve the quality of life, please press three. -- Alice Kahn This is due to some assembly redirects that are added to the devenv.exe.config file by installing the GAX (Guidance Automation Extensions). Here is the fix, and it's an easy one: 1) Navigate to: C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE in Windows Explorer 2) Load devenv.exe.config in your favorite text editor. 3) Find this string: "Microsoft.VisualStudio.TemplateWizardInterface" 4) Comment out the element so it looks like this: <dependentAssembly> <!--assemblyIdentity name="Microsoft.VisualStudio.TemplateWizardInterface" publicKeyToken="b03f5f7f11d50a3a" culture="neutral" /--> <bindingRedirect oldVersion="0.0.0.0-8.9.9.9" newVersion="9.0.0.0" /> </dependentAssembly> 5) Restart Visual Studio 2008. All fixed!
Read more

FIREFOX / IE Word-Wrap, Word-Break, TABLES FIX

By
One of the most annoying things a developer (who would normally delight in writing code, not futzing with markup) can have is getting rendering issues between different browsers. The two biggest players are of course Internet Exploder and Firefart (as I lovingly like to refer to each). In most cases that's going to take care of 98 percent of your total site traffic. IE has had a proprietary "word-break" style attribute for a long time, and this made it into the CSS 3.0 spec. But that doesn't necessarily help you with Firefox right now. Firefox literally - (and I consider this completely idiotic, since it's been in their bug database for FIVE YEARS) does not have a reliable CSS style element to force table cell content to break in the middle of a word in order to stop the content from expanding your table / div off the page or over other content on the page. Here's a partial fix, which will work for most tables and browsers. The style declaration (I call it m...
Read more